Vertical Machining Center (Linear guide ways)
Travel
| X / Y / Z travel | 850/510/560 mm |
| Spindle nose to table surface | 150~710 mm |
| Spindle center to column surface | 608 mm |
Table
| Table size | 1000×500 mm |
| T slot ( Size / Qty / Dist. ) | 18x5x100 mm |
| Max. table load | 500 Kgs |
Spindle
| Speed | 8,000 rpm |
| Taper | BT40/DIN40/CAT40 |
| Transmission | Belt |
Feed Rate
| Rapid feed rate of XYZ | 36/36/36 M / min |
| Cutting feed rate | 1~10 M / min |
Automatic Tool Changer
| Tool storage capacity | Arm type 24 tools |
| Max. tool diameter | Full: 100 mm Next empty: 150 mm |
| Max. tool length | 300 mm |
| Max. tool weight | 6 Kgs |
CNC Controller & Motor
| CNC controller | Mitsubishi (*FANUC/SIEMENS/HEIDENHAIN) |
| Spindle motor | 5.5/7.5 kw (10 HP) |
| Axis motor | 2 KW |
Coolant
| Coolant pump | 0.75 HP |
| Coolant tank capacity | 230 L |
Air & Power Supply
| Air source | 6 Kg / cm2 |
| Power supply | 15 KVA |
Machine Dimension
| Dimension | 2,900×2,420×2,850 mm |
| Net weight | 5,000 kgs |
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine. Specifications are subject to change without notice.
Technical data
BT-40 / CAT40 / DIN40 spindle (ø150mm). 100% balanced with low vibration performs high precision machining. Air blow function is standard to keep chips from falling into Spindle.
Optional spindle speed
Optional spindle speed: 10,000 / 12,000 / 15,000 / 24,000 / 30,000 RPM
Advantage
Hardened & Ground C3 Double-Nut ballscrews (ø40mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
Positioning accuracy
Positioning accuracy: ± 0.005mm / 300mm Repeating accuracy: ± 0.003mm / 300mm
