Vertical Machining Center (Linear guide ways)
Travel
X / Y / Z travel | 1300/700/700 mm |
Spindle nose to table surface | BT40:130~830 mm BT50: 100~800 mm |
Spindle center to column surface | 770 mm |
Table
Table size | 1,450×700 mm |
T slot ( Size / Qty / Dist. ) | 18x5x125 mm |
Max. table load | 1,000 Kgs |
Spindle
Speed | BT40: 8,000 rpm BT50: 8,000 rpm |
Taper | BT40/BT50 |
Transmission | Belt |
Feed Rate
Rapid feed rate of XYZ | 30/30/24 M / min |
Cutting feed rate | 1~12 M / min |
Automatic Tool Changer
Tool storage capacity | Arm type 24 tools |
Max. tool diameter | BT40 Full: 80 mm Next empty: 150 mm BT50 Full:125 mm Next empty:150 mm |
Max. tool length | BT40: 200 mm BT50: 300 mm |
Max. tool weight | BT40: 7Kgs BT50 :15 Kgs |
CNC Controller & Motor
CNC controller | Mitsubishi (*FANUC/SIEMENS/HEIDENHAIN) |
Spindle motor | 7.5/11 kw ( 15 HP ) |
Coolant
Coolant pump | 1 HP |
Coolant tank capacity | 400 L |
Air & Power Supply
Air source | 6 Kg / cm2 |
Power supply | 12 KVA |
Machine Dimension
Dimension | 3,650×2,915×3,027 mm |
Net weight | 7,000 kgs |
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine. Specifications are subject to change without notice.
The sufficient depth from spindle center to machine column not only accommodates 700mm Y axis travel but also enables easy access for large diameter facing milling cutter.
Full support Y axis with 4 roller linear guide ways.
Six Roller Shoes are employed on the machine column that firmly supports the headstock to perform heavy duty cutting.
45 mm Oversized Ball Screws, the VL1300 employs high precision fine ground ball screws for optimum motion control accuracy.
The double chip augers deliver chips out of machine during cutting, that prevent chips from depositing in the machine.
Another benefit is to save time in chip removing by the operator.